Occupancy Sensors

Occupancy sensors for lighting control typically use infrared (IR), ultrasonic, tomographic motion detection, microwave sensors, or camera-based sensors (image processing).  The field of view of the sensor must be carefully selected/adjusted so that it responds only to motion in the space served by the controlled lighting. For example, an occupancy sensor controlling lights in an office should not detect motion in the corridor outside the office. Tomographic motion detection systems have the unique benefit of detecting motion through walls and obstructions, yet do not trigger as easily from motion on the outside of the detection area like traditional microwave sensors.

Sensors and their placement are never perfect, therefore most systems incorporate a delay time before switching. This delay time is often user-selectable, but a typical default value is 15 minutes. This means that the sensor must detect no motion for the entire delay time before the lights are switched. Most systems switch lights off at the end of the delay time, but more sophisticated systems with dimming technology reduce lighting slowly to a minimum level (or zero) over several minutes, to minimize the potential disruption in adjacent spaces. If lights are off and an occupant re-enters a space, most current systems switch lights back on when motion is detected. However, systems designed to switch lights off automatically with no occupancy, and that require the occupant to switch lights on when they re-enter are gaining in popularity due to their potential for increased energy savings. These savings accrue because in a spaces with access to daylight the occupant may decide on their return that they no longer require supplemental electric light.

User Benefits

Saves electrical energy in Air Conditioners, Fans and Lighting

Reliable due to various inbulit protections

No nuisance switching due to precision detection logic

Additional power saving by ambient light sensing for lighting switching

No wiring needed! Aesthetics of room is retained intact

Good ROI! Starts saving immediately

Sensor can be freely placed where required

Switches will work, even if sensors fail or run out of battery!

Rapid deployment in under an hour

Adds convenience and is also beneficial to environment!

Single sensor can control multiply switches

Conforms to NBC, IESNA, IGBC, GRIHA and USGBC standards.

Applications

Cabin lighting & AC

Corridor lighting

Street lighting

Toilet lighting & exhaust fans

Warehouses

Elevators

Staircases

GreenMagic is a series of innovative energy saving products, certified and promoted by a team of experienced industrial profession and energy auditors. We provide energy audit services and energy conservation training, having 75 years of cumulative experience in industrial energy audit services and energy conservation training.

All greenmagic products are chosen on the basis of not only energy savings, but also product quality, after sales support and reliability.

You can be rest assured about the long lasting benefits of energy saving by choosing greenmagic.

For more information contact us on:- +91 - 253 - 6614302 / 6602766 / 6603022

Visit us :- http://www.greenmagic.co.in/